I’ve been using MySQL 8 on Linux for a couple years but the Linux repository version didn’t install the new MySQL Shell. So, I discovered the new MySQL Shell when I installed MySQL 8 (8.0.21) on Windows to teach my student how to use it to learn SQL commands. I encourage you to read the full MySQL Shell document.

The following is a tutorial to provision a student user and studentdb database in MySQL. It uses the MySQL Shell (mysqlsh) and stages for uploads of comma-separated values files.

After installing MySQL on the Windows 10 OS, open the Window OS Command Line Interface (CLI) shell by entering the following in the search field at the bottom left:

cmd

It launches a CLI interface to the Windows OS. The cmd (command) utility opens the CLI in the following …

While preparing a set of student instructions to create a MySQL 8 (8.0.21) Windows 10 instance I found an error with LOAD command and the --secure-file_priv variable set in the my.ini file. After granting the global FILE permission to the previously provisioned student user:

GRANT FILE ON *.* TO 'student'@'localhost';

Any attempt to run the following command failed:

LOAD DATA INFILE 'C:\ProgramData\MySQL\MySQL Server 8.0\Uploads\avenger.csv'
INTO TABLE avenger
FIELDS TERMINATED BY ','
ENCLOSED BY '"'
ESCAPED BY '\\'
LINES TERMINATED BY '\r\n';

and, raise this error message:

ERROR: 1290: The MySQL server is running with the --secure-file-priv option so it cannot execute this statement

The following covers my exploration to try and fix this error without removing a designated directory for secure file uploads. While MySQL 5.7 …

We all like when error messages are descriptive and give a clear idea about what is happening; however, there are some cases when a few possible reasons lay behind one error message. “MySQL server has gone away” is one of them. Most of the cases when the error occurs are described in MySQL documentation, but it can get tricky. And here, I’d like to talk about “tricky”.

There are only a few major cases when this happens:

1. MySQL Thread Was Killed by an Administrator or a Utility Such as pt-kill

The manual intervention is likely to be intermittent and, as it is a one-time thing in certain situations (e.g., a bad long-running query), probably would be known to a DBA. Pt-kill might be less noticeable, as it is often left running as a workaround to prevent those bad long queries from taxing system resources. Checking the system …

By Maksym Kryva.

If you don’t verify backups you may safely assume you don’t have them.

It often happens that MySQL backups can be invalid or broken due to a software bug, or some hidden corruption. If you are lucky enough, hours and days will be needed to resurrect a database from a bad backup copy. If you ran out of luck quota, you may lose a lot of data. Hence the importance of data backup verification. Not many companies do backups, and even less verify them. To make the verification problem easier, we have added a verify command to the TwinDB Backup Tool.

What the command does is that it takes a backup copy, restores it, prepares (applies redo logs, fixes permissions and so on) and runs a MySQL instance on it. Then it checks if the recovered database is healthy. You can …

If you have a New Relic Infrastructure Pro license, and unmonitored MySQL servers, there’s now an easy solution at your fingertips. With the New Relic MySQL integration you can monitor and graph almost any detailed metric you could possibly want. New Relic recently unified its analytics tools with New Relic One, a dashboard that provides quick access to all the New Relic tools. With an Infrastructure Pro subscription, you get access to:

• New Relic Infrastructure: Flexible, dynamic monitoring of your entire infrastructure, from services running in the cloud or on dedicated hosts, to containers running in orchestrated environments.
• New Relic Alerts: A flexible, centralized notification system that unlocks the operational potential of New Relic. Alerts is a single tool to manage alert policies and alert conditions for all of your New Relic data.
…

In Deleting data we have been looking at a process that loads data into MySQL, leveraging partitions to make it easier and faster to later get rid of the data again. For this, we created three processes, a data loader process, and two observers - one for creating partitions, and one for deleting them.

The observer processes have been running ANALYZE TABLES and then polling INFORMATION_SCHEMA.PARTITIONS every 1/10th of a second to check if intervention is needed. They then have been dynamically generating the necessary ALTER TABLE statements maintaining the proper partitioning of the table by adding and dropping additional partitions.

That is cumbersome and should not be necessary.

Using SQL to maintain partitions

It is possible to prepare and execute dynamic DDL in MySQL, using …

MySQL will be used for our online sections because the VMware instance and Docker configurations where too large to effectively download this term.

MySQL 8.0.21 Installation Steps

After you download the MySQL 8 MSI file, you will perform the following 24 steps to install MySQL on Windows 10. If you want a full developer install you must install Microsoft Excel and Visual Studio first.

1. The first thing you need to do is grant privileges to allow the MySQL Installer application to work in Windows 10. Click the Yes button to authorize the MySQL Installer to run.

1. The next thing you need to do is grant privileges to allow …

This post was first published on Oracle MySQL Blog.

If you are running MySQL on premise, it’s maybe the right time to think about migrating your lovely MySQL database somewhere where the MySQL Team prepared a comfortable place for it to stay running and safe.

This awesome place is MySQL Database Service in OCI. For more information about what MDS is and what it provides, please check this blog from my colleague Airton Lastori.

One important word that should come to your mind when we talk about MDS is SECURITY !

Therefore, MDS endpoint can only be a private IP in OCI. This means you won’t be able to expose your MySQL …

Completing the data lifecycle is often harder than originally expected: Deleting data can cost sometimes way more than inserting it in the first place. MySQL Partitions can offer a way out. We have an earlier post on the subject.

A sample table, and a problem statement

Let’s define a kind of log table, to which data is added with an auto_increment id value and some data.

#! /usr/bin/env python3

from time import sleep
from random import randint
from multiprocessing import Process

import click
import MySQLdb
import MySQLdb.cursors


db_config = dict(
    host="localhost",
    user="kris",
    passwd="geheim",
    db="kris",
    cursorclass=MySQLdb.cursors.DictCursor,
)

@click.group(help="Load and delete data using partitions")
def sql():
    pass

@sql.command()
def setup_tables():
    sql_setup = [
        "drop table …

Our pleasure to announce the MySQL Day which will be hold on September 26, 2020. Please find more details below and at the Oracle India User Group website.

• Name: MySQL Day
• Date: September 26, 2020
• Agenda: 
  • 11:00 to 11:20 - Welcome: MySQL Day Agenda by Sanjay Manwani, the MySQL India Dev. Sr. Director, Oracle. 
  • 11:30 to 12:00 - Keynote: State of MySQL by Tomas Ulin, the Vice President, Oracle
  • 12:15 to 13:15 - Hands-On: Introduction to MySQL Database Service (MDS) by Jothir Ganesan, the Software Development Manager, Oracle  
  • 13:15 to 14:15 - Lunch Break    
  • 14:15 to 15:00 - Hands-on: Backup and restore of MDS  by Gagan Goel, the Senior Development Manager, …